Search
Close this search box.
Search
Close this search box.

Reliability Competency

Training CSI dan AMS Software

Training CSI dan AMS Software akan mempelajari tentang pengaplikasian dari Vibration Analyzer CSI 2130/2140 termasuk analisis ahli lebih lanjut menggunakan Analyzer. Dalam pelatihan AMS Suite akan dijelaskan database setup, parameter setup, alarm setup, fault frequency setup, bearing fault calculation, gear frequency calculation dan automatic diagnostic. Peserta juga akan melakukan praktikum penggunaan Vibration Analyzer dan Software Analisis.

Pelatihan CSI dan AMS PT Tiara Vibrasindo Pratama
Gambaran suasana training CSI dan AMS

Training Ini Diperuntukan Bagi..

Siapapun yang ingin percaya diri dan mampu mendiagnosis dengan Aplikasi Vibration Analyzer CSI 2130/2140 dan juga melakukan pengukuran yang akurat pada AMS Suite perlu mengikuti kursus ini. Kursus ini sangat direkomendasikan untuk Senior Engineer, Condition Monitoring Engineer, Data Collector Ahli dan Maintenance Supervisor.

Konten Training

Overview of CSI-2130

Program Overview

Connection between CSI-2130 & RBMcom (AMS Suite Software)

  • Connection of CSI-2130 and RBMcom (AMS Suite software)
  • Step by step to make connection
  • Collecting Data procedure (both on-route and off-route)

Create Route for data collection

Overview Of Application AMS Suite: Vibview Software

Building Vibration Database Setup Using RBM Wizard Software

  • Tree Diagram For Vibration Database
  • Step By Step Creating Vibration Database
  • Building Machine Configuration
  • Setup Database And Machine Baseline Setup
  • Copy and Edit Database for Typical Machine.

Utilize Vibration Database Setup Using Database Setup Software

Data Collection, Analysis & Setup Vibration Test and Analysis Guide (VTAG)

  • Routine data collection
  • Bump test for natural frequency detection
  • Acquire spectrum for High Frequency Detection

Practical Workshop Using Vibration Analyzer and Analysis Software:

  • Workshop Building Database
  • Workshop Creating Route
  • Workshop Collecting Vibration Data Using 2130 And Download Data To Software For Baseline
  • Workshop in Analysis Data, building report and Giving Recommendation

Analysis Machinery Problem using CSI 2130

  • Utilize phase data for machinery problem confirmation; Unbalance, misalignment, looseness, etc.
  • Zoom Analysis
  • Analysis for Grease Problem detection
  • Analysis for Rolling Bearing Problem

Jadwal Training CSI dan AMS Software

Informasi Harga dan Fasilitas

Silahkan menghubungi Ulfa (ulfa@tiaravib.com) atau customer care Tiara: Klik icon whatsapp

Share this

Open chat
Hello Ms.Tiara here 😊
How can i help you?